Empowering Businesses to Thrive in the Digital Era – Businesses Trade

Empowering Businesses to Thrive in the Digital Era – Businesses Trade

4.2 mm Ivory-Birch Fine-Pore Flush-Edge PP Click Flooring

4.2 mm wood-look PP click flooring, pale ivory birch, fine-pore matte, flush square edges, one plank width; calm, light-reflective, for shared workspaces and light commercial interiors. Concept specs.

Click-lock Flooring / Concept Series

4.2 mm Ivory-Birch Fine-Pore Flush-Edge PP Click Flooring

A pale, fine-pore mono-width plank concept with a flat, unbeveled edge, developed for calm and light-filled shared interiors.

Pale ivory birch wood-look click flooring in a daylit co-working lounge with a regular offset plank rhythm

Concept application visualisation. Not a photograph of an installed project.

A Quieter Kind of Wood Look

Some interiors need a floor that stays in the background. This concept series is built around that idea: a very pale ivory birch tone, a fine-pore grain with deliberately low contrast, and a matte brushed surface that reads as timber without the strong figure of oak or walnut. The result is a surface that supports daylight, furniture and planting rather than competing with them.

The design uses a single plank width across the whole series. End joints are offset in a regular rhythm, so the eye reads long, uninterrupted lines rather than a busy pattern. Because the edges are flush square edges with no bevel, adjacent boards meet as a flat plane instead of a grid of visible grooves. For specifiers, that is a visual decision as much as a technical one: it changes how large a room feels and how much the floor draws attention to itself.

This is a concept proposal for a separate 4.2 mm wood-look PP click flooring series. It is presented as a design direction for review, not as an approved or tested product specification.

Concept Specification

Total thickness 4.2 mm (concept)
Concept wear layer 0.15 mm, indicative only
Plank length 610 mm (concept)
Plank width 152 mm, one single width across the series (concept)
Surface direction Fine-pore, low-contrast, matte brushed wood grain
Edge visual Flush square edge, no micro-bevel and no V-groove
Click system Concept click joint; exact profile to be confirmed
Suggested applications Co-working lounges, breakout areas, light commercial interiors, residential living areas

All values above are concept parameters. They are not measured results, certified ratings or production data. No performance claim, test result or packaging figure from another thickness series is carried over to this 4.2 mm concept.

Fine-Pore Grain, Flat Edges

The surface direction is the main visual difference from the darker, high-contrast wood looks in the existing range. Grain pores are kept small, the tonal range is narrow, and the brushing is soft rather than deeply textured. Under raking daylight the boards show fine linear detail; from a standing height they read as one quiet, even field. That makes the series a candidate for spaces where a large floor area should not dominate the scheme.

The flush edge reinforces the same intent. Without a chamfer, there is no shadow line between boards, so the offset end joints carry the rhythm instead. Samples should be reviewed under the actual lighting of the intended space, because pale, low-contrast surfaces respond strongly to colour temperature and to the direction of glazing. Colour and batch expectations for repeat orders should be agreed separately with the supplier before any volume commitment.

Close-up of pale fine-pore birch wood grain, a flush square plank edge and a concept click joint

Concept structure visualisation. Edge profile and joint geometry are illustrative and must be confirmed by engineering.

A Separate 4.2 mm Series

The 4.2 mm thickness is treated as its own series, not as a variant of an existing product. An indicative layer split used to discuss the concept is set out below. It exists to make the design idea clear, not to define a manufacturing route.

Indicative concept build-up – 4.20 mm total

Concept wear layer: 0.15 mm

Decorative print film: 0.10 mm

PP mineral composite core: 3.85 mm

Concept balancing layer: 0.10 mm

This is a descriptive concept stack, not a measured cross-section. Layer order, materials, thickness tolerance, click geometry and any wear-layer construction must be defined by engineering and production before a specification is issued. Finished floor height, transition details and door clearances should be checked against the finally approved build-up.

Suggested Applications

The concept is aimed at shared workspaces and breakout areas, light commercial interiors such as meeting rooms and reception zones, and residential living areas where a pale, uniform floor is wanted. In open-plan rooms the mono-width format helps keep the layout legible, while the low-contrast grain reduces visual noise around furniture and glazing.

Suitability for any specific project depends on the finally approved product construction, the subfloor condition, the fixing and transition details, and the site environment. Traffic expectations, cleaning regime, movement joints and perimeter detailing should be reviewed by the project team rather than assumed from a concept image. Where a project needs particular acoustic, slip, fire or indoor-air documentation, request the applicable files for the confirmed product and evaluate them separately.

Discussing a pale wood-look flooring project?

Share your target thickness, plank format, surface direction, estimated area and project schedule with our team. We can review the design direction together and identify which parameters need engineering confirmation before samples or quotations are prepared.

Wenzhou Qinsi New Materials Co., Ltd. – Xinjue Flooring. Small-batch, made-to-drawing customisation and OEM enquiries can be discussed subject to case-by-case feasibility and commercial terms.

Concept and image notice

The images in this page are AI-generated concept visuals. They are not factory photographs, not real project photographs and not evidence of a tested construction. Thickness, wear layer, plank dimensions, click profile, layer build-up, surface treatment, performance, colour batch tolerance and packaging are concept parameters. No certification, test result, performance conclusion, customer project or company event is claimed. Formal publication requires review and confirmation by engineering, production, quality and sales for the specific project and the finally approved product.

Reviews

There are no reviews yet.

Be the first to review “4.2 mm Ivory-Birch Fine-Pore Flush-Edge PP Click Flooring”

Your email address will not be published. Required fields are marked *

Cart

Your Cart is Empty

Back To Shop
Continue Shopping
Payment Details
Sub Total $0.00