Electronic Oil Pressure Sensor for Generator Engine Monitoring
Fortrust Power’s electronic oil pressure sensor provides accurate 0–1 MPa measurement and low-power signal feedback for compatible generator controllers.
Product Overview
The electronic oil pressure sensor from Fortrust Power is designed to measure engine oil pressure and convert pressure changes into electrical signals for monitoring and control applications. It provides reliable pressure feedback to compatible generator controllers, helping operators monitor engine lubrication conditions and obtain accurate operating information.
With a pressure measurement range of 0–1 MPa and a voltage output of 0.5–4.5V, this sensor offers a practical solution for electronic oil pressure measurement in generator applications. It can replace traditional VDO mechanical hydraulic pressure sensors and works with compatible Fortrust control equipment.
Accurate Pressure Measurement
Measurement accuracy is less than ±1.5%VFSS, supporting consistent pressure signal acquisition. The sensor uses a 5V supply and provides an output voltage that changes with the measured pressure. This allows compatible controllers to receive pressure information for monitoring and related control functions.
Wide Temperature Compensation Range
Designed for demanding operating environments, the electronic oil pressure sensor has a temperature compensation range of -40°C to +125°C and a storage temperature range of -40°C to +135°C. Its operating current is less than DC 4mA, supporting low-power operation in electronic sensing applications.
Electrical Specifications and Connection
The sensor operates at DC 5 ± 0.5V and provides a 0.5–4.5V output when the supply voltage is 5V and the pressure range is 0–1 MPa. Its maximum pressure is 3 MPa, while the maximum voltage rating is 40VDC. The matching connector is PACKARD #12065287, featuring a dustproof and waterproof design for reliable electrical connection.
Compatible Generator Controller Applications
The 5V power supply can be provided by Fortrust GEC6500 series controllers, supporting convenient integration with compatible generator control equipment. The sensor also provides an alternative starting-success signal without requiring a speed sensor for this purpose, according to the product specifications.
Technical Specifications
| Item | Specification |
|---|---|
| Pressure range | 0–1 MPa |
| Accuracy | Less than ±1.5%VFSS |
| Operating voltage | DC 5 ± 0.5V |
| Output voltage | 0.5–4.5V |
| Operating current | Less than DC 4mA |
| Maximum pressure | 3 MPa |
| Maximum voltage | 40VDC |
| Temperature compensation | -40°C to +125°C |
| Storage temperature | -40°C to +135°C |
| Matching connector | PACKARD #12065287 |
Fortrust Electronic Oil Pressure Sensing Solution
Fortrust Power provides electronic sensing products for generator control applications. With defined pressure measurement specifications, low operating current, and compatibility with selected Fortrust controllers, this electronic oil pressure sensor supports dependable engine pressure monitoring and electrical signal feedback.
Related products
-
● It overcomes the phenomenon of inaccurate positioning and unstable feeding test caused by the wear and stretching of traditional chains over a long period of time.
-
At present, the plate heat exchanger unit has realized the intelligent and remote control technology, and the main heat exchanger is the plate heat exchanger. The plate heat exchanger unit has the advantages of high heat transfer efficiency, energy saving, intelligence, automation and so on. It can be widely used in civil building heat exchange and industrial heating refrigeration equipment.
-
Appearance material: It is an aluminum alloy profile, and its appearance is relatively popular. It is light in weight, not heavy and difficult to push and pull, and is quick and easy to install. It is suitable for a wide range of people.
-
Насосы серии JHB – это одноступенчатые центробежные насосы с осевым всасыванием и радиальным разрезом под погружением, соответствующие стандарту API610-11th. Насосы этой серии могут находиться на глубине до 3,6 метров под жидкостью, имеют двойную конструкцию опоры, с двумя рядами радиально-упорных шарикоподшипников на жидкости для восприятия осевой нагрузки, и одной или двумя парами подшипников скольжения (то есть втулок и обечаек) под жидкостью для восприятия радиальной нагрузки. Токоведущие части изготовлены из высококачественного сплава JSB, устойчивого к высокой температуре и коррозии серной кислоты, и имеют преимущество длительного срока службы.
-
Titanium pressure vessel for chemicals (including acetic acid production) titanium pressure vessels are suitable in corrosive environments, notably for the production of acetic acid.
Reviews
There are no reviews yet.