Elbow Pressurized Balance Bellows Expansion Joint
It consists of 2 working bellows connected by another working bellows or an intermediate pipe, a balancing bellows, elbows or tees, heads, tie rods, end plates, spherical washers, as well as cone wash
https://www.wx-zhongbo.com/elbow-pressurized-balance-bellows-expansion-joint.html
https://www.wx-zhongbo.com/elbow-balance-bellows-joints.html
The Elbow Pressurized Balance Bellows Expansion Joint is designed for industrial piping systems that need to accommodate combined axial and lateral displacement while balancing the pressure and thrust generated by the bellows.
It consists of two working bellows connected by another working bellows or an intermediate pipe, together with a balancing bellows, elbows or tees, heads, tie rods, end plates, spherical washers, cone washers, and other related components.
The expansion joint is mainly used for absorbing combined axial-and-lateral displacements and balancing the pressure and thrust of the bellows. Its elbow-based configuration makes it suitable for piping applications where movement occurs in more than one direction.
Specification
-
Nominal Diameter: DN50-DN5000
-
Working Pressure: 0.25-1.6 MPa
The appropriate specification should be selected according to the actual piping configuration, required displacement, and operating conditions.
Related products
-
1. After the billet is pulled out from the continuous casting machine, surface temperature is 750 ~ 850℃, internal temperature 950 ~ 1000℃, 1/3 of the interior of the billet does not need to be reheating.
2. Select different oscillation frequencies according to different billet cross-section sizes, you can get the best heating efficiency.
3. No need to install, plug and play. No need to preheating, start heating when starting up. -
-
Year: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
We specialize in the production of fully automatic high speed nail making machine series, high-speed nail rolling machine, high-speed wire rolling machine, paper nail arranging machine, plastic nail arranging machine, nail washing machine.
-
Reviews
There are no reviews yet.