ALU-PVC & ALU-ALU Blister Packing Line T1000

ALU-PVC & ALU-ALU Blister Packing Line T1000 | Tailian

Run tablets and capsules at up to 1,000 blisters per minute with a single line that links blister forming, vacuum transfer, dual-cutter punching and full-servo cartoning.

Pharmaceutical producers running high-volume tablet and capsule output need a packaging stage that keeps pace with upstream granulation and compression. The T1000 addresses that requirement as an integrated blister packing line that pairs blister forming, sealing and punching with downstream cartoning in one continuous flow.

Both ALU-PVC and ALU-ALU formats are supported. Maximum output reaches 1,000 blisters per minute and 500 cartons per minute, with a consistent operating speed of 800 blisters and 400 cartons per minute during regular production.

The blister section is engineered for sustained high speed: three heating zones span 900 mm, a large forming area supports stable cavity definition, and cooling-water circulation runs through guiding plates as well as the rotary or platen sealing station. The embossing and perforating station can be repositioned along the line, the dual-cutter punching station limits film waste, and vacuum-belt transfer carries blisters to the cartoner. High-speed feeders for tablets and capsules can be specified, with multiple detection methods rejecting defective products.

Downstream, the full-servo automatic cartoning machine replaces manual adjustment with servo motors so specifications change through parameter settings. Reserved space between blister machine and cartoner accepts an isolation wall, protecting the clean zone before cartons are closed and supporting GMP-compliant packaging equipment requirements.

Multiple options are available for customer-specific configuration, allowing this pharmaceutical packaging equipment to be matched to different production layouts.

T1000 Ultra-High-Speed Blister Packing Line | Tailian